Official AK Picture Thread

Avomat Kalashnikov, Samozaryadnyi Karabin Sisyemi type rifles and variants
User avatar
NorincoKid
Posts: 73
Joined: Wed Jul 18, 2018 4:40 pm
Location: Spring Hill, Hernando County

Re: Official AK Picture Thread

Post by NorincoKid » Thu Jul 26, 2018 12:02 pm

Skoll wrote:
Thu Jul 26, 2018 11:14 am
I know you know your shit but please be careful when handling bombs.
Eh. I wouldn't go that far. I'm not a master builder by any means.

I was able to kinda save the front stub when I demilled my MP5K kit, so I have what I think is a salvageable magazine well from that. Was always thinking about trimming it and welding up with an AK receiver for a 9mm blowback build, kinda like the Vityaz. It was either that, or try to cut the magazine well portion of a PPS43 kit and go for 7.62x25 TOK

Image

User avatar
NorincoKid
Posts: 73
Joined: Wed Jul 18, 2018 4:40 pm
Location: Spring Hill, Hernando County

Post by NorincoKid » Tue Aug 07, 2018 10:53 am

From back in the day, finally finished up. An old "Bocefus" $79 matching #'s original barreled Romanian G kit, on a NDS-3 with a Polish side folding stock and bakelite handgaurds and a healthy coat of Rustoleum AE.

Image

User avatar
Skoll
Posts: 237
Joined: Wed Jul 18, 2018 2:39 pm
Location: West Palm

Post by Skoll » Tue Aug 07, 2018 11:04 am

NorincoKid wrote:
Tue Aug 07, 2018 10:53 am
From back in the day, finally finished up. An old "Bocefus" $79 matching #'s original barreled Romanian G kit, on a NDS-3 with a Polish side folding stock and bakelite handgaurds and a healthy coat of Rustoleum AE.

Image
That's niiiice. How many unfinished parts kits do you even have?
"The essential American soul is hard, isolate, stoic, and a killer. It has never yet melted.”

User avatar
NorincoKid
Posts: 73
Joined: Wed Jul 18, 2018 4:40 pm
Location: Spring Hill, Hernando County

Post by NorincoKid » Tue Aug 07, 2018 1:11 pm

Skoll wrote:
Tue Aug 07, 2018 11:04 am
That's niiiice. How many unfinished parts kits do you even have?
Thanks. For kits, not much really. I have enough parts and a receiver to put one more together here on hand, thats about it. With the price of AK kits/parts lately I've been starting to get into other projects.

I have some "modern" type parts, was thinking about doing a modernized AK (hinged railed top cover, combo front sight/gas block, M4 Stock etc) but I think If I want a black gun with rails and doohickeys I'd just do an AR.

User avatar
NorincoKid
Posts: 73
Joined: Wed Jul 18, 2018 4:40 pm
Location: Spring Hill, Hernando County

Post by NorincoKid » Wed Aug 15, 2018 2:49 pm

Image

Image

User avatar
Grip Hugger
Posts: 32
Joined: Sun Jul 22, 2018 11:25 am
Location: Lake County

Post by Grip Hugger » Sun Aug 19, 2018 10:42 am

My Yugo under folder. This is my first AK. Thanks Rentprop1 for repairing the folder latch
Image
Image
The shooter formerly called #1Glock30

Miami_JBT
Posts: 93
Joined: Wed Jul 18, 2018 4:17 pm

Post by Miami_JBT » Sat Sep 08, 2018 1:27 pm

Image


Image


Image

Been strangely after one of these for a while and picked one up. A Norinco Polytech Hunter Sporter, unfired. Patterned after the milled steel Galil receiver instead of a standard ChiCom stamped AK receiver. Not many made or imported into the US.

Miami_JBT
Posts: 93
Joined: Wed Jul 18, 2018 4:17 pm

Post by Miami_JBT » Sat Sep 08, 2018 1:31 pm

My two 5.56 guns....

Image


Image


Zastava M90NP and Century Arms Golani Sporter.

Image

Image

User avatar
NorincoKid
Posts: 73
Joined: Wed Jul 18, 2018 4:40 pm
Location: Spring Hill, Hernando County

Post by NorincoKid » Sun Sep 09, 2018 5:43 pm

A Hunter has been on my want list for quite some time. Kicking myself for not getting one a decade or so ago when they were more affordable. Oddballs, but nice guns.

User avatar
Skoll
Posts: 237
Joined: Wed Jul 18, 2018 2:39 pm
Location: West Palm

Post by Skoll » Sun Sep 09, 2018 6:07 pm

Unf, those are beautiful rifles.

I don't mind 5.56 AKs, but I prefer them without the magwell add-ons, aesthetically.
"The essential American soul is hard, isolate, stoic, and a killer. It has never yet melted.”

Post Reply