Is this NFA or no?

Machine guns, SBRs, SBSs, suppressors, destructive devices, AOW (any other weapon)
Post Reply
User avatar
Jonathanw
Contributor
Contributor
Posts: 1136
Joined: Mon May 05, 2014 7:42 pm
Location: Lutz

Is this NFA or no?

Post by Jonathanw » Sun Nov 06, 2016 3:29 pm

Image

Is this a non NFA item?

Of course it's not practical [smilie=011.gif] however would be an interesting upper build to do as a clone of the one used in the predator movies

Image

User avatar
Rentprop1
Life Member
Life Member
Posts: 22981
Joined: Mon Feb 09, 2004 1:09 pm
Location: Finally relaxin in the country in Citrus Co

Re: Is this NFA or no?

Post by Rentprop1 » Sun Nov 06, 2016 4:01 pm

It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
In the days of the old west a 6 shooter was as common as cell phones are today and just annoying if they go off in a theater.

User avatar
Nicolas
Life Member
Life Member
Posts: 8790
Joined: Wed Feb 08, 2006 3:26 am
Location: Nottingham - England

Re: Is this NFA or no?

Post by Nicolas » Sun Nov 06, 2016 4:03 pm

Don't say a word against Billy ..... [smilie=011.gif]

User avatar
Jonathanw
Contributor
Contributor
Posts: 1136
Joined: Mon May 05, 2014 7:42 pm
Location: Lutz

Re: Is this NFA or no?

Post by Jonathanw » Sun Nov 06, 2016 4:31 pm

Rentprop1 wrote:It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
Well I know aboutbthe master key but it's usually the 8in or so barrel which would be an SBS. If It's a 14in barrel shotgun than it's legal? No NFA required?

Than from there eventually I could do a SBS paperwork and change out the barrel?

John K
Administrator
Administrator
Posts: 579
Joined: Sun Feb 06, 2011 12:33 am
Location: Ft. Lauderdale

Re: Is this NFA or no?

Post by John K » Sun Nov 06, 2016 6:25 pm

Jonathanw wrote:
Rentprop1 wrote:It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
Well I know aboutbthe master key but it's usually the 8in or so barrel which would be an SBS. If It's a 18in barrel shotgun than it's legal? No NFA required?

Than from there eventually I could do a SBS paperwork and change out the barrel?
Correct

User avatar
Jonathanw
Contributor
Contributor
Posts: 1136
Joined: Mon May 05, 2014 7:42 pm
Location: Lutz

Re: Is this NFA or no?

Post by Jonathanw » Sun Nov 06, 2016 6:39 pm

John K wrote:
Jonathanw wrote:
Rentprop1 wrote:It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
Well I know aboutbthe master key but it's usually the 8in or so barrel which would be an SBS. If It's a 18in barrel shotgun than it's legal? No NFA required?

Than from there eventually I could do a SBS paperwork and change out the barrel?
Correct
Thanks for the correction [smilie=cheers1.gif]

User avatar
Jonathanw
Contributor
Contributor
Posts: 1136
Joined: Mon May 05, 2014 7:42 pm
Location: Lutz

Re: Is this NFA or no?

Post by Jonathanw » Mon Nov 07, 2016 12:54 pm

Image

Back in the earlier 2000s seems like someone use to do conversions. Seems simple but looks like they welded the parts on the gun/barrel ?

User avatar
osprey21
Executive Member
Executive Member
Posts: 888
Joined: Sun Apr 18, 2004 6:54 am
Location: Palma Sola, Fla.

Re: Is this NFA or no?

Post by osprey21 » Tue Nov 08, 2016 5:24 am

I have one of JAC's "Ultimate" O/U set-ups.

Image

User avatar
Jonathanw
Contributor
Contributor
Posts: 1136
Joined: Mon May 05, 2014 7:42 pm
Location: Lutz

Re: Is this NFA or no?

Post by Jonathanw » Tue Nov 08, 2016 1:02 pm

osprey21 wrote:I have one of JAC's "Ultimate" O/U set-ups.

Image
Sent you a PM for questions

bugman
Life Member
Life Member
Posts: 1505
Joined: Mon Aug 02, 2004 11:13 am
Location: Orlando, corner of Gaylando and Little Saigo, across from the BlackHOP

Re: Is this NFA or no?

Post by bugman » Wed Jan 25, 2017 10:41 pm

John K wrote:
Jonathanw wrote:
Rentprop1 wrote:It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
Well I know aboutbthe master key but it's usually the 8in or so barrel which would be an SBS. If It's a 18in barrel shotgun than it's legal? No NFA required?

Than from there eventually I could do a SBS paperwork and change out the barrel?
Correct
What about if the shotgun was PGO from the factory?

User avatar
Rentprop1
Life Member
Life Member
Posts: 22981
Joined: Mon Feb 09, 2004 1:09 pm
Location: Finally relaxin in the country in Citrus Co

Re: Is this NFA or no?

Post by Rentprop1 » Wed Jan 25, 2017 11:45 pm

bugman wrote:
John K wrote:
Jonathanw wrote:
Rentprop1 wrote:It's called the Master Key
mount is made by Knights Armament

I think that heavy bastard weighs about 17 lbs loaded [smilie=011.gif]
Well I know aboutbthe master key but it's usually the 8in or so barrel which would be an SBS. If It's a 18in barrel shotgun than it's legal? No NFA required?

Than from there eventually I could do a SBS paperwork and change out the barrel?
Correct
What about if the shotgun was PGO from the factory?

Humm ... :-k .a PGO " other " under a pistol would be real interesting ???
In the days of the old west a 6 shooter was as common as cell phones are today and just annoying if they go off in a theater.

User avatar
870Mike
Life Member
Life Member
Posts: 4981
Joined: Wed Apr 24, 2013 6:32 pm
Location: Broward (Da 'Hood)

Re: Is this NFA or no?

Post by 870Mike » Fri Jan 27, 2017 8:30 pm

bugman wrote:
What about if the shotgun was PGO from the factory?
My guess is the ATF would consider the host gun a shoulder stock added to your PGO.
"Send lawyers & money...have enough guns." - 870Mike

bugman
Life Member
Life Member
Posts: 1505
Joined: Mon Aug 02, 2004 11:13 am
Location: Orlando, corner of Gaylando and Little Saigo, across from the BlackHOP

Re: Is this NFA or no?

Post by bugman » Sat Jan 28, 2017 1:03 pm

870Mike wrote:
bugman wrote:
What about if the shotgun was PGO from the factory?
My guess is the ATF would consider the host gun a shoulder stock added to your PGO.
Yeah, hadn't thought of that.

Post Reply